Setting The Water Temperature; Advanced Use - Krups BW410831 Manual De Instrucciones

„ „
The light inside the kettle changes colour according to the temperature of the wa
ter(green>cyan>blue>violet>red).
„ „
When the water boils, a beep sounds and the kettle is switched off automatically.
Note:
You may interrupt the heating cycle at any time by pressing the ON/OFF button or
by removing the kettle from its base.
Do not leave water in the kettle after use.

SETTING THE WATER TEMPERATURE

This electronic kettle allows you to heat water to the desired temperature. In order for
the temperature displayed on the panel to be as accurate as possible, fill your kettle
with at least 0.5L of water.
Press the "temperature setting" button (C) several times to display the various
temperatures (50°C, 60°C, 70°C, 85°C) and stop at the desired temperature.
„ „
A red dot lights up below the selected temperature and the selected temperature
flashes on the panel.
„ „
The heating cycle starts and the water level lights up. Each temperature selected
corresponds to a colour of light: cyan for 50°C, blue for 60°C, violet for 70°C and
red for 85°C.
„ „
When the water is heating up, the temperature of the water is displayed on the
digital screen.
Note:
the pre-selected temperature may be modified at any time by pressing the
"temperature setting button" (C) several times to choose the new temperature.
The heating cycle may be stopped at any time either by removing the kettle from
its base or by pressing the "temperature setting button" (C) several times until it
switches off.
„ „
When the water reaches the pre-selected temperature, a beep sounds.
„ „
A warm cycle will start automatically. The water will be kept at the selected
temperature for 30 min.
„ „
The panel continues to display the temperature of the water.
PURIFYING THE WATER
This electronic kettle has a water purification function. By means of a long boiling
process, the kettle eliminates the bacteria present in the water.
„ „
Press the "water purification button" (D)
„ „
After a normal cycle, the kettle keeps the water boiling for 3 minutes.
„ „
At the end of the purification cycle, a beep sounds and the kettle is switched off
automatically.
Note:
the heating cycle or the purification cycle may be stopped at any time either by
removing the kettle from its base or by pressing the "water purification button" (D).

ADVANCED USE

Several functions may be combined: For example, you can start a normal boiling cycle
followed by a warm cycle or a purification cycle followed by a warm cycle. The warm
cycle lasts for 30 minutes and keeps the water at the desired temperature.
„ „
Boiling cycle followed by warm cycle
„ „
Select a warm temperature using the "temperature setting" button (C) and then
press the "ON/OFF" button (E).
7