Meter and Lancing Device Cleaning and Disinfecting
How to Clean and Disinfect the Lancing Device
WARNING
Failure to follow these instructions may damage the lancing device and stop it from working properly.
• DO NOT get any moisture into any openings.
• Always use the same product for both cleaning and disinfecting.
1
Wash hands thoroughly
with soap and water.
2
Wipe the entire surface of
the lancing device and the
inside of the cap with an
approved cleaning and
disinfecting product.
3
Dry the lancing device and
cap with a soft cloth or
gauze. Make sure no
solution is seen in any
opening.
4
For disinfecting the
lancing device, get a new
wipe or cloth.
Repeat steps 2 and 3
following the
manufacturer's
instructions for
disinfecting.
Wash hands thoroughly
with soap and water.
37
6