Philips sonicare FS1000 Manual Del Usuario página 10

10
English
35_021_1633_1_DFU-Luxury_A6_v1.indd 10
2 Identify if you are using the original AirFloss or
AirFloss Pro:
a The original AirFloss (type number HX81XX
or HX82XX found on bottom of handle) will
only have (1) LED on the handle.
b AirFloss Pro (type number HX83XX found
on bottom of handle) will have (3) LEDs on
the handle, and will have a metallic accent
ring just below where the nozzle connects
to the handle.
3 Remove the reservoir door from your existing
AirFloss or AirFloss Pro handle by opening
the door, grabbing the door by the base, and
twisting.
4 Insert your new reservoir door (the smaller
door included is for the original AirFloss and
the larger door is for AirFloss Pro) by:
a Inserting the tube into the handle reservoir
with the tube facing up.
b Placing one pin of the door hinge into one
side of the handle just beneath the door
opening.
c Grabbing the door at the base and twisting
until the door snaps into place.
d Test the door by opening and closing. You
should feel resistance when opening and
closing.
17/11/16 14:30