Led Screen Functioning - Be Cool zeus plus Manual De Instrucciones

EN
Installing the seat in the forward facing position,
from 105cm to 125cm:
2a. Press the button (8) to turn the seat.
2b. Turn the seat until you feel it lock into the loading
position ready for the child to be placed in it (perpen­
dicular to the forward racing position).
2e. Press the button (8) again to place the seat in the
forward facing position.
It is important to check that the seat is firmly locked
into place, the screen (12) will indicate if everything
is correct.
With the child place in the seat put the seat belt on
passing it through the guidefl 7). Fasten the seat belt
buckle and make sure the belt is not too loose gently
pulling the diagonal part of the belt before placing the
belt over the childs chest.
30
Check the diagonal belt passing it through the lower
belt guide (18)

LED SCREEN FUNCTIONING

The LED screen indicates whether the child restraint
system has been installed correctly, helping you to
follow the correct steps to install the seat as well as
guiding you if any of the control settings are wrong.
1f. The screen checks the following points:
Seat rotation
The seat has 2 functioning positions, forward facing
or rear facing, and 2 lending positions (passenger side
or driver side).
The loading positions are not suitable for use while
travelling, therefore the screen will indicate that the
position is incorrect by displaying an "X".
ISOFIX connectors