Using The Zeus Plus In The Rear Facing Or Forward Facing Position - Be Cool zeus plus Manual De Instrucciones

1g. Move the button (10) to open the connector and
release it from the anchor point.
2. USING THE ZEUS PLUS IN THE REAR
FACING OR FORWARD FACING POSITION
Installing the seat in the rear facing position, from
40 cm to 105 cm:
2a. Press the button (8) to turn the seat.
2b. Turn the seat until you feel it lock into the loading
position ready for the child to be placed in it (perpen­
dicular to the forward facing position).
2c. Press the button (8) again to place the seat in the
rear facing position. It is important to check that the
seat is firmly locked into place, the screen (12) will
indicate if everything is correct.
WARNING! Never use on a seat fitted with an AIRBAG.
Using the cushion insert
The cushion insert (4) is designed for use with 3mon­
ths babies to give them greater comfort and stability,
and offer them a more stretched out position, pre­
venting their head from falling forwards. The insert
can be used until the baby weighs 5.5 kg.
Storing the safety harness away:
2d. Once the child has reached a height of 105 cm,the
harness should be stored away and the child should
be secured with the vehicle safety belt.
To store the harness away it needs to be fully loosen
first, lift the cover and store the buckle parts in
the compartment.Then put the cover back on the
seat. Hiding the shoulder pad in the rearside of the
upholstery.
EN
29