Coupling To The Tractor - Nogueira NSG-9200 Manual De Instrucciones

Coupling to the tractor

Place the machine and the tractor on a flat location, align the head bar (machine) to the towing bar
(tractor).
fig.24
Put the tractor into reverse gear, fitting the towing bar into the machine connector. Use the jack to
adjust the height of the machine connector.
fig.25
Place the connection pin and lock it using the
cotter pin.
Remember after placing the cotter pin (fig.25) and check if the connector pin
is well-latched. Accidental uncoupling of the machine, when towed, can
result in a serious accident.
NSG-9200
fig.26
After coupling, remove the jack and place it in the
transport position.
17