General Safety Rules - Freeman PF20LM Manual Del Usuario

MODEL: PF20LM
GENERAL
SAFETY
RULES
UNPACKING
FEATURES
OPERATION
PREPARE THE TOOL
LOADING L CLEATS
UNLOADING L CLEATS
CHANGING THE FOOT PLATE
SETTING THE AIR PRESSURE
OPERATING THE TOOL
CLEARING JAMS
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLESHOOTING
WEARABLE PARTS
WARRANTIES
WARNING:
The warnings and precautions discussed in this manual cannot cover all possible conditions
and situations that may occur. Please be aware of the potential hazards, and take all
necessary precautions to avoid risk of injuries.
SAVE THIS MANUAL
●
Keep this manual for the safety
war ning, precautions, operations,
i n s p e c t i o n s a n d m a i n t e n a n c e
information. Keep this manual and
the receipt in a safe and dry place for
future reference.
02
HTTP://WWW.FREEMANTOOLS.COM
P3
P5
P6
P6
P6
P8
P8
P8
P8
P10
P11
P12
P13
P14
P14
! WARNING:
To avoid serious personal injury,
d o n o t a t t e m p t t o u s e t h i s
product until you read the manual
thoroughly and understand it
completely. Save this manual and
review frequently for continuing
safe operation and instructing
others who may use this tool.
1-888-669-5672
MODEL: PF20LM
SYMBOLS
●
The following signal words and meanings are intended to explain the levels of risk
associated with this tool, and can be found in the manual, packaging, labeling, and
all other information provided with this tool:
SYMBOLS SIGNAL MEANING
Indicates a potentially hazardous situation,which, if
WARNING:
!
not avoided, could result in death or serious injury.
Indicates a potentially hazardous
! CAUTION:
not avoided, may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result
CAUTION:
in property damage.

GENERAL SAFETY RULES

INSTRUCTIONS PERTAINING TO A RISK
O F F I R E , E L E C T R I C S H O C K , O R
INJURY TO PERSONS.
!
WARNING:
When using tools, basic precautions
should always be followed, including
the following:
CALIFORNIA PROPOSITION 65
!
WARNING:
his product can expose you to
chemicals including lead, which is
known to the State of California to
cause cancer and birth defects or
other reproductive harm. For more
information, go to
www.P65Warnings.ca.gov.
WORK AREA
●
Keep the work area clean and well
lit. Cluttered benches and dark areas
increase the risks of accidents.
●
Do not operate the tool in explosive
a t m o s p h e r e s , s u c h a s i n t h e
presence of flammable liquids,
gases, or dust. The tool creates a
spark which may ignite flammable
liquids, gases or dust.
●
Keep bystanders, children, and
others away while operating the
tool. Distractions could result in
improper use and cause injury.
●
A v o i d u n i n t e n t i o n a l m i s f i r e s .
A l w a y s u s e c a u t i o n t o a v o i d
accidentally firing. Do not point at
yourself or anyone else regardless if
it contains fasteners or not.
HTTP://WWW.FREEMANTOOLS.COM
situation, which, if
PERSONAL SAFETY
●
Always wear eye protection. Operator and
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard
against flying fasteners and debris, which
may cause severe eye injury.
●
Always wear hearing protection when
using the tool. Prolonged exposure to high
intensity noise may cause hearing loss.
●
Use safety equipment. A dust mask, non-
skid safety shoes and a hard hat must be
used for the applicable conditions. Wear a
full face shield if you are producing metal
filings or wood chips.
● Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your long
hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry, or long hair
can be caught in moving parts.
●
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating the tool may cause serious injury.
● Avoid unintentional firing. Keep fingers
away from hammer when not driving
fasteners, especially when connecting the
tool to the air supply.
●
Keep proper footing and balance at all
times. Proper footing and balance enables
better control of the tool in unexpected
situations.
●
Do not use on a ladder or unstable
supports. Stable footing on a solid surface
enables better control of the tool in
unexpected situations.
1-888-669-5672
03