Freeman PF20LM Manual Del Usuario página 3

Clavadora para pisos para listones en l de calibre 20 clavadora para pisos par
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MODEL: PF20LM
Make sure the hose is free of
obstructions or snags. Entangled or
snarled hoses can cause loss of balance or
footing and may become damaged,
resulting in possible injury.
Wash hands after handling. This product
or its power cord may contain chemicals
known to the State of California to cause
cancer and birth defects or other
reproductive harm.
TOOL USE AND CARE
Know this tool. Read manual carefully,
learn its applications and limitations, as
well as the specific potential hazards
related to this tool.
O n l y
u s e
f a s t e n e r s
t h a t
recommended for your models. Do not
use the wrong fasteners or load the
fasteners incorrectly.
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool's
operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
Maintain tools with care. Keep tool clean.
A properly maintained tool reduces the risk
of binding and is easier to control.
Store tools out of the reach of children
and other untrained people. Tools are
dangerous in the hands of untrained users.
Check operation of the tool before use.
Do not use the tool if the workpiece contact
mechanism is not working correctly as
accidental driving of a fastener may occur.
Do not force tool. Use the correct tool for
your application. The correct tool will do
the job better and safer at the rate for
which it is designed.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding a tool by hand or
against the body is unstable and may lead
to loss of control.
Keep the tool and its handle dry, clean
and free from oil and grease. Always use a
clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum-based products,
or any strong solvents to clean your tool.
Do not use the tool as a hammer.
Never use this tool in a manner that
could cause a fastener to be directed
toward anything other than the
workpiece.
04
HTTP://WWW.FREEMANTOOLS.COM
Never use gasoline or other flammable
liquids to clean the tool. Never use the
tool in the presence of flammable liquids or
gases. Vapors could ignite by a spark and
cause an explosion which will result in
death or serious personal injury.
Always fit the tool with a fitting or hose
coupling on or near the tool in a way that
all the remaining compressed air in the
tool is discharged at the time the fitting
or hose coupling is disconnected. Do not
use a check valve or any other fitting which
allows air to remain in the tool. Death or
serious personal injury could occur.
Never carry the tool by the air hose or
pull the hose to move the tool or a
compressor. Keep hoses away from heat,
a r e
oil and sharp edges. Replace any hose that
is weak, worn, or otherwise damaged.
Personal injury or tool damage could occur.
Always assume the tool contains
fasteners. Respect the tool as a working
implement; no horseplay.
Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that
will make the tool unusable or unsafe. If the
tool has been dropped or thrown, examine
the tool closely for an air leak or bent,
cracked or broken parts. STOP and repair
before using, or serious injury could occur.
Avoid using the tool when the magazine
is empty. Accelerated wear on the tool may
occur.
Clean and check all air supply hoses and
fittings before connecting the tool to an
air supply. Replace any damaged or worn
hoses or fittings. Tool performance or
durability may be reduced.
Do not use the tool if it leaks air or does
not function properly.
Do not operate the tool if it does not
contain a legible warning label.
Always carry the tool by the handle.
Never carry the tool by the air hose.
TOOL SERVICE
Only use accessories that are identified
by the manufacturer for the specific tool
model.
Use of unauthorized parts or failure to
follow maintenance instructions may
create a risk of injury.
Only use the lubricants supplied with the
tool or specified by the manufacturer.
Tool service must be performed only by
qualified repair personnel.
1-888-669-5672
MODEL: PF20LM
OPERATION
Do not drive fasteners near the edge of
workpiece. The workpiece may split
causing the fastener or ricochet, potentially
injuring you or people around.
Do not drive fasteners on top of other
fasteners or with the tool at an overly
steep angle. This may cause deflection of
fasteners which could cause injury.
Do not actuate the tool unless you intend
to drive a fastener into the workpiece.
Always handle the tool with care:
Respect the tool as a working implement.
Never engage in horseplay.
Keep others a safe distance from the tool
while tool is in operation as accidental
actuation may occur, possibly causing
injury.
AIR SUPPLY AND CONNECTIONS
The connector on the tool must not hold
p r e s s u r e
w h e n
a i r
s u p p l y
disconnected. If an incorrect fitting is used,
the tool can remain charged with air after
disconnecting and thus will be able to drive
a fastener even after the air line is
disconnected, possibly causing injury.
Do not use oxygen, combustible gases or
bottled gases as a power source for this
tool. An explosion may occur, causing
injury or death.
Do not use any type of reactive gases,
including, but not limited to, oxygen and
combustible gases, as a power source.
Use filtered, lubricated, and regulated
compressed air only. Use of a reactive gas
instead of compressed air may cause the
tool to explode which will cause death or
serious personal injury.
Use
only
a
pressure-regulated
compressed air source to limit the air
pressure supplied to the tool. The
regulated pressure must not exceed 115
psi. If the regulator fails, the pressure
delivered to the tool must not exceed 115
psi. The tool could explode which will cause
death or serious personal injury.
Always disconnect the air source:
Before unloading or making adjustments.
When maintaining the tool.
When clearing a jam.
When touching the safety yoke.
When tool is not in use.
When moving to a different work area.
HTTP://WWW.FREEMANTOOLS.COM
Such precautionary measures reduce the risk
of injury to persons.

LOADING
TOOL
Do not load the tool with fasteners when
any one of the operating controls is
activated.
Never place a hand or any part of body in
fastener discharge area of tool.
Never point the tool at anyone.
!
WARNING:
The warnings and precautions
discussed above cannot cover all
possible conditions and situations that
may occur. It must be understood by
the user that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by the user.
i s
UNPACKING
This tool has been shipped completely
assembled.
Carefully remove the tool and any
accessories from the box.
Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
Do not discard the packing material until
you have carefully inspected and
satisfactorily operated the tool.
If any parts are damaged or missing,
please call 1-888-669-5672.
!
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
!
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such
alteration or modification is misuse and
could result in hazardous condition
leading to possible serious personal
injury.
1-888-669-5672
05

Publicidad

Tabla de contenido
loading

Tabla de contenido