Important - DJI D-RTK Guia De Inicio Rapido

• Use the Air System Power Cable
Usage
Configuring Parameters Using DJI Assistant 2
IMPORTANT: The Ground System and Air System should be connected to the computer separately and
activated. Be sure to configure parameters with DJI Assistant 2 for first time use.
1. Download DJI Assistant 2 from www.dji.com and install it on your computer.
2. Connect the Ground System to the computer with DJI Assistant 2 launched, and then go to Connected
Devices > D-RTK to configure the coordinates.
3. When configuring the Air System, ensure the A3 Flight Control System is connected. Connect the
Flight Control System to the computer with DJI Assistant 2 launched. Select the connected Flight
Control System from the Connected Devices page, and then go to DJI Devices > Air System Antenna
to configure antenna offset parameters.
Configuring the Ground System
• Connect the Ground System and the Air System one by one to the computer for firmware
upgrade. Power cycle the DATALINK PRO, Flight Control System and D-RTK after upgrading.
• Supports Windows 7 (or later) or Mac OS X 10.9 (or later).
if using the D-RTK with other types of aircraft.
II
Configuring the Air System
© 2017 DJI All Rights Reserved.
7