Kohler K-669 Guia De Instalacion página 13

Reverse Inlet Supplies (optional) (cont.)
Verify the cold cartridge inlet is on the left when the valve stem
adapter is facing you.
NOTE: The hot and cold cartridge inlets are identified on the top
and sides of the cartridge tabs. The tabs are labeled "H" and "C" to
identify hot and cold.
Reinstall the seals onto each side of the cartridge.
Carefully push the cartridge back into the valve body. Make sure
both cartridge tabs are properly seated inside the cartridge slots
of the valve body.
Hand tighten the head nut onto the valve body. Do not
overtighten.
Return the integral supply stops back to their original position.
Kohler Co. 13 1041158-2-F