Advice On Disposal - UFESA AS3100 Manual De Instrucciones

4
Disconnect the telescopic suction pipe from the
nozzle or brush.
5
Disconnect the suction tube from the hose. In order
to remove the telescopic tube from the hose handle,
simultaneously press the lock "A" and pull the tube in
the direction indicated by the arrow.
6
Turn the end of the suction hose counter-clockwise,
and remove the end of the hose from the inlet of the
vacuum cleaner.
7
The vacuum cleaner may be store in a horizontal
position. In order to do this place the hook of the nozzle
brush into the fastening of the nozzle brush situated
at the back of the vacuum cleaner, near the entrance
of the power cord. The hose may stay attached to the
vacuum cleaner as long as it is not bent too much
during storage.
8
If necessary, clean the casing and the chamber
of the vacuum cleaner with a damp cloth (it may be
damped in dishwashing liquid), dry it off, and wipe it dry.
Do not use any scrubbing agents or
solvents.
Examples of problems you may
encounter when using the vacuum
cleaner
PROBLEM
A characteristic
fluttering in the
vacuum cleaner is
heard.
The vacuum
cleaner works less
efficiently.
The cut-out of the
wiring system has
been triggered.
SOLUTION
● Check the "CYKLON"
dust container and other
accessories. Remove the
reason for the clog-up
or empty and clean the
"CYKLON" dust container.
● Replace or clean the filters.
Empty and clean the
"CYKLON" dust container,
replace or clean the filters,
check the suction pipe, the
hose, and the nozzle – remove
the reason for the clog-up.
Check if there are any other
devices, besides the vacuum
cleaner, plugged into the same
electrical circuit. If the cut-out
is triggered again, have the
vacuum cleaner repaired in
a servicing center.
PROBLEM
The vacuum
cleaner does not
work; the body or
the power cord is
damaged.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
may be penalised. Correct disposal of discarded
appliances means that they can be recycled and
processed ecologically, helping the environment and
allowing materials used in the product to be reused.
For more information on available waste disposal
schemes contact your local refuse service or the shop
where the product was purchased. Manufacturers and
importers are responsible for ecological recycling,
processing and disposal of products, whether directly
or via a public system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any
time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
SOLUTION
Have the vacuum cleaner
repaired in a servicing center.