Technical Data; Product Approval/Ce Mark; Cleaning - Disty distybox 300 Instrucciones De Operación

Technical data

Standard:
Frequency range:
EN
Transmission performance:
Voice transmission:
Fax mode:
Modem mode:
Dialling mode:
Connectable telephones:
CLIP:
Operating temperature:
Relative humidity:
Permissible storage
temperature:
Display unit:
Dimensions:
Weight:
Mounting location:
Power supply:
Delivery package:
26
DECT (Digital Enhanced Cordless
Telecommunications, GAP‑
compatible)
1880 MHz to 1900 MHz
10 mW on average
32 kbit/s ADPCM
Group 3, V.29, 9600 bit/s max.
9600 bit/s maximum
DTMF (voice frequency signalling)
Up to three standard telephones
can be connected in parallel
Transmission via FSK1; protocol
conforms to ETSI standard
+10° C to +40° wC
20 % to 75 %
‑10° C to +60° C
LED
120 x 100 x 38 mm (W x H x D)
140 g
Wall mounting in interior rooms
12 V DC +/‑ 15 % = 10.2 ‑13.8 V
(0.12 A zero signal current,
0.4 A max.)
230 V AC, 50 Hz power supply
unit, optional adapter
Operating instructions

Product approval/CE mark

disty communications gmbh hereby declares that the
distybox
300 conforms to the fundamental requirements and
other relevant regulations stated in Directive 2014/53/EU
(Radio and Telecommunication Terminal Equipment, R & TTE).
Conformity is declared by the CE mark. The full declaration
of conformity can be viewed on the following website:
www.disty.de

Cleaning

Simply wipe the device with a slightly damp cloth or with an
antistatic cloth; do not use a dry cloth. Do not use cleaning or
scouring agents.
Operating instructions
EN
27