Distybox 300; Important Information; Connections And Indicators - Disty distybox 300 Instrucciones De Operación

Important information

distybox
The
300
universal usage when operating analogue terminals on GAP‑
compatible DECT systems. Essentially a "cordless extension
distybox
cable", the
EN
cabling work and can be registered on any standard DECT/
GAP base station just like an extra cordless handset. The
distybox
300 can be used to connect analogue telephones,
fax machines, answering machines, entrance intercoms and
modems to your DECT base station. The device must use
DTMF dialling (voice frequency signalling); terminals that only
support pulse dialling cannot be used on the
your device uses pulse dialling, please check if it can also be
switched over to DTMF dialling.
distybox
The 300
standard DECT range of up to 30 m indoors and up to 300 m
out of doors.
NOTE More information can be found in the download area on our
homepage www.disty.de
16
is a DECT‑standard cordless adapter for
eliminates the need for complicated
300
distybox
. If
300
features an integrated aerial and has a
Operating instructions
Connections and indicator
220/230V
2
50 Hz
1 Power supply
2 Power supply unit (adapter)
NOTE After plugging in the power supply unit, the handset on the
connected telephone must remain on the hook for at least
30 seconds.
Only the power unit supplied should be used. Before opening
NOTE
the housing, ensure that the power supply unit is disconnected!
3 LED
I ‑ time interval 8 sec ‑ I
LED off
Operating instructions
1
1 m
4
LED on
No power supply
Ready to use / standby mode /
power available (220 / 230 V) /
device is registered at a base station
Incoming call alert
Connection
Programming mode (Menu)
Search for the base
Found the base
No Basis
EN
3
17