Rola 59972 Guía De Instrucciones página 7

INSTALLATION INSTRUCTIONS
1. Remove Rola RE cross bars from the carton.
Slide out the outer under-cover strips. Fig. A
2. Slide the positioning slider inward. The slider
will be positioned after the crossbar
assembly is on the vehicle. Fig. B
Fig. B
3. Open the cam levers on all the FPE end
supports. Fig. C
Slide
PAGE 7 59972N Rev A • Questions? (800) 234-6992 • ROLAProducts.com
Fig. A
Under-cover strips
End tab (B)
Fig. C
Cam
Lever