Arachnid BULLSHOOTER ILLUMINATOR 3.0 Instrucciones Y Reglas página 5

UNPACKING THE GAME
Unpack your new dartboard carefully, making sure all parts are included. The following
components are included in this set:
 1 Electronic Dartboard
 6 Darts (unassembled)
 Soft tip replacement pack
 Owner's Manual
Attaching the Cabinet Doors to the Dartboard
Your electronic dartboard may require a one time assembly of the doors to the housing of the
main dartboard unit. Please follow the directions very carefully. Please note that the doors are
intended to be assembled only 1 time to the dartboard and are not designed to be removed after
they are assembled on to the dartboard. Taking the doors on and off may cause the hinges to
crack or break and will not be covered under warranty. Please pay attention to the directions and
the pictures below to ensure you assemble your doors correctly.
Step 1
Position the front of door facing towards you and match up to the dartboard with the back of the
dartboard facing you as shown below.
Step 2
Slide the hinge pins of the door into the slotted area on the dartboard as shown below.
All Rights Reserved
©2014 Escalade Sports
5
ILM300
For Customer Service Call 1 -800- 526 - 0451