Setting The Clock; Timer Touch Control Setting The Clock; Minute Counter; Cooking Time - Fulgor Milano QUAD QO 9009 PT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
Timer touch control

Setting the clock

GB
"Auto" and "0:00" will start flashing when the unit is
switched on for the first time. To set the clock, press the
central button for about 3 seconds. When
press "+" or "-" to set the correct time.
Wait until a beep tells you that the clock has been set
(figure 1).
To set the time at a later stage, press "+" and "-" together
for 3 seconds and then adjust the clock as described
above.

Minute counter

As this minute counter does not control the oven, when it
finishes counting the oven will continue to work.
To set, press the central button for 3 seconds
appears (figure 2). Press "+" and "-" to set the required
time.
To set the minute counter at a later stage, press the
central button for 3 seconds and adjust as described
above.
The minute counter beeps when it finishes counting. To
disable it, press any button.

Cooking time

This is a semi-automatic cooking function. It can be used
to set cooking times.
Press the central button for 3 seconds. Then press it
again until "dur" appears (figure 3). Press "+" and "-" to
set the required cooking time.

End of cooking time

Fig. 1
The end of cooking time can also be set.
Press the central button for 3 seconds. Press the central
button twice consecutively and wait for "End" to appear
(figure 4). Press "+" and "-" to set the required end of
appears,
cooking time.
The oven will work in the set mode and at the set
temperature until the end of cooking time.

Programming automatic cooking

Fig. 2
Cooking function with set times.
until
Press the central button for 3 seconds. Then press it
again until "dur" appears. Press "+" and "-" to set the
required cooking time. Wait a few seconds for the setting
to be memorised.
Press the central button for 3 seconds. Press it another
two times and wait for "End" to appear (figure 4). Press
"+" and "-" to set the required end of cooking time.
E.g.:
Current time: 12.30
Cooking time: 10 minutes
End of cooking time: 14.00
The oven will start cooking at 13.50 (14.00 less 00.10)
at the set temperature and in the set mode and will stop
at 14.00.
The oven will beep when it stops cooking. To disable it,
Fig. 3
press any button.
18
Fig. 4
Fig. 5

Publicidad

Tabla de contenido
loading

Tabla de contenido