If you want to remove the water tank from the appliance completely, you must first remove
the water pump. This is fixed to the bottom of the water tank by means of two blowout
latches
push the blowout latches outwards and then pull out the water pump.
COOL PACKS
You will receive a cool pack that can be put into the water tank for a further cooling effect.
When using the cool packs, please note the following:
1. Open the cool pack and fill it with water.
2. The water tank should be filled with water before placing the cool pack.
3. When inserting the cool packs into the tank, make sure that the MAX mark is not
exceeded.
When doing so, please make sure that the MAX mark is not exceeded.
Never attempt to open the cool packs for any reason. The liquid contained in it can be
NOTE
NOTE
Ice cubes can also be filled into the water tank.
ATTENTION
harmful to health.
Seite 22 von 156