MODES
Use the
button to select between the following modes:
Normal Mode
Nature Mode
Sleep Mode
TIMER
Use the
button to switch off the appliance in a time-controlled way.
With each press on the timer button, the operating time is gradually extended by
one hour each time – pay attention to the indication of the hour in the middle of the
display:
o
1x press 1 hour 1H appears on the display
o
2x press 2 hours 2H appears on the display
o
......
o
8x press 8 hours 8H appears on the display
COOL AIR & AIR HUMIDIFIER
Use the
button to start the COOLING AIR function, or the
the AIR HUMIDIFIER function.
The appliance now starts pumping water out of the water tank in both functions to
create cold and moist air, that is then blown out of the appliance. The colder the
water, the colder the air flowing out of the appliance.
With the COOL AIR function, you can choose between the medium and high fan
speeds.
In the AIR HUMIDIFIER function, the fan automatically runs only at the low speed.
Make sure that the water level indicator is above the MIN level.
IONISER
Use the
button to start the function.
The appliance now begins to distribute ionised air into the room. The resulting
atoms and molecules are used to eliminate odours and disinfect the air.
Runs in the function that has been set.
The appliance automatically changes the speeds to
simulate a natural and rhythmic wind.
Reduces the speed every half hour until it runs at the
lowest speed.
NOTE
Seite 26 von 156
button to start