JUKI MO-6 14/LB-6 Serie Manual De Instrucciones página 68

(2) Selecting procedure of the machine head type
Do not perform switch operations other than those described in the following explanations.
Be sure to re-turn the power switch ON after one second or more has passed. If the power is
turned ON immediately after turning it OFF, the sewing machine may not work normally. In
this case, turn ON the power again.
6
5
14
Specified No.
1 Switch for entering specified value changed
and updating setting No. in DOWN direction
2 Switch for entering specified value changed
and updating setting No. in UP direction
How to change over to the function setting mode
[Changeover to the users' mode]
1)
2)
4
3)
Specified value
2
1
Turn OFF the power to the unit.
Pressing switch 4, turn ON the power to the unit.
Indication 5, 6 will be shown on the display. (If
the indication fails to change, re-perform the pro-
cedures 1) and 2).
3
4
3 Down switch (DOWN)
4 Up switch (UP)