Publicidad
Idiomas disponibles
Idiomas disponibles
Minimum Required Tool List:
3/8" Drive Ratchet
3/8 Drive Extension, 6"
15mm Socket
Reciprocating saw/hacksaw
Pry Bar
Wire Brush
Shop Supplies:
Spray Lubricant
Kit Content:
Description
1. Rear Muffler Assy
2. Intermediate Pipe
3. Front Resonator
4. 2.25" Clamp
5. Gasket
6. Instruction Sheet (not shown)
7. Emission Label 23444741
(If included. Discard for MY 2016 to MY2019 vehicles)
8. Premium Fuel Required Label 20933713
CAUTION!!! Never work on a hot exhaust system. Serious injury in the form of burns can result. If the vehicle has been in use and
the exhaust system is hot, allow vehicle to cool for at least 1 hour. Always wear eye protection when working under any vehicle.
NOTE: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new Chevrolet Sonic
1.4L Turbo Stage Kit exhaust system.
Taking all under car safety precautions, lift the vehicle using a hoist or hydraulic lift. Once this has been done, you may begin the removal
of your old exhaust system from your vehicle.
NOTE: Before removing the original exhaust system from your vehicle, please compare the parts you have received with the bill of
materials provided to assure that you have all the parts necessary for the installation of your new Chevrolet Performance 1.4L Turbo
Stage Kit exhaust system.
Chevrolet Sonic 1.4L Turbo Stage Kit Exhaust System
Sonic 1.4 L Turbo Stage Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Qty
1
1
1
2
1
1
1
1
23444740
REV 24JA17
PART NO.
DATE
Previous Revisions are Archived
19MY16
Revision - Vinod Kaushal
Revision - Vinod Kaushal
01JL16
24JA17
Revision - Vinod Kaushal
2
SHEET
REVISION
21
OF
AUTH
JHFGT
JNNJW
JXZDR
Publicidad
