Brake Adjustment - Foundations LX3 Instrucciones De Montaje

To operate canopy window:
1.
Roll canopy window up towards top of
canopy.
2.
Thread hook & loop fastener through
sewn loop on back edge of canopy,
fold over sewn loop and press strap
together(Fig. 3).
Repeat for other fastener.
Runaway Brake Operation And Adjustment
Runaway brake should be periodically checked for proper operation.
If the brake does not stop the stroller or the brake lever contacts the
tops of the teeth on the brake gear runaway brake MUST be
adjusted.
To check for proper operation of runaway brake:
NOTE: DO NOT check for proper operation of runaway brake while any
children are in stroller.
1.
Check braking operation:
- Pull runaway brake handle to release the brake and push the stroller
at a walking pace on a flat level surface.
- While walking, release the runaway brake handle.
- The stroller wheels should stop almost immediately, if wheel does not
stop, check for stones or other objects in brake gear or brake lever.
Check if brake cable needs adjustment. If brake operation cannot be
restored, call Foundations
2.
Check cable adjustment:
- Pull runaway brake handle back to release brake.
- Move stroller and visually inspect for contact of brake lever on brake
disc. If brake lever contacts brake disc, brake cable length MUST be
adjusted.
Canopy Operation
• Only use Foundations provided
or approved accessories for this
stroller.
Brake Adjustments
Customer Service.
®
18
Fig. 3