Descargar Imprimir esta página

Airwell R410A Manual Del Usuario página 15

Ocultar thumbs Ver también para R410A:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Maintenance
Cleaning the air outlet port and the shell:
Don t use gasoline, benzene, diluents, polishing powder or liquid insecticide to clean
them.
Do not clean them with hot water of above 50
Wipe them with soft dry cloth.
Water or neutral dry cleanser is recommended if the dust cannot be removed.
The Wind Deflector can be dismantled to clean (as below).
Cleaning Wind Deflector:
Do not wipe the wind deflector with water forcibly to avoid the floss falling off.
Maintenance before and after Operating Season
1. Please make the following checkup:
There is no blockage in inlet port and outlet port of outdoor and indoor units.
The ground line and the wiring are in the proper state.
If abnormal condition occurs, consult the after-service personnel.
2. Clean the air cleaner and the shell.
After cleaning, the air cleaner must be mounted.
3. Switch it on to the power.
After cleaning, the air cleaner must be mounted.
1. In sunny days, blowing operation can be performed for half a day to make the
of machine dry.
2. Switch it off.
Electrical power should be cut down to economize electricity, or the machine will still
consume power.
3. Clean the air cleaner and the shell.
Air cleaner and shell must be mounted after cleaning. For cleaning details, refer to
Maintenance.
Attention
Before Operating Season:
After Operating Season:
7
to avoid fading or distorting.
inside

Publicidad

loading