Perform A Spot Test; Treatment Steps - Silk’n Motion H3220 Manual Del Usuario

6.3 Perform a spot test

You must decide which energy level is right for your skin, and the
area you want to treat. For example, you might treat one area at
EN
energy level 1, and another at level 4.
To choose the right energy level, test each treatment area
separately (refer to the skin colour chart at the front of this
manual).
Repeat this spot test for each part of the body you wish to treat.
1. Press the control button (#4) to turn on the device. The
level 1 energy level indicator light
2. Place the treatment surface (#6) on your skin to deliver one
pulse. If you do not experience abnormal discomfort press
the control button (#4) again. This will increase the energy
level. Deliver one pulse on a different spot at energy level 2.
3. Continue testing at increased energy levels. Use the energy
levels indicated on the skin colour chart. When you find the
highest energy level that is comfortable for that treatment
area, you can start your treatment.
Z
Use a lower energy level if you experience discomfort.
You are now ready to peform a treatment.

6.4 Treatment steps

1. Press the control button (#4). The device will turn on, the
level 1 energy indicator light (#1) will be on, and a fan
sound will start.
2. After pressing the control button (#4), the ready light (#3)
will turn on. The device is then ready to use at the lowest
energy level. Always start at energy level 1 for your first
treatment.
will go on.
(#1)
18