PROBLEM
Side Burner burns with a yellow or
orange flame, in conjunction with the
smell of gas.
Side Burner does not light.
Flame is low in "HI" position
Push button ignition does not work.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web
site. Log onto www.weber.com
®
.
SIDE BURNER MAINTENANCE
WARNING: All gas controls and supply valves should be in
the "OFF" position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and grounding clip.
Spark should be a white/blue color, not yellow.
1) Igniter Wire
2) Ground wire
3) Burner
Side Burner Grate
Head Retention Clip
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter Button
WARNING: The side burner orifice
(4) must be parallel to the side
burner tube opening (5).
WWW.WEBER.COM
®
SIDEBURNER TROUBLESHOOTING
CHECK
Inspect side burner orifice alignment
(Position of orifice to side burner tube.)
Is gas supply off?
Is the fuel hose bent or kinked?
Does burner light with a match?
Loosen orifice and re-align orifice parallel to the side burner tube (3).
(See Section "Side Burner Maintenance")
Turn supply on.
Straighten hose.
If match lights burner, check igniter (see below).
(3)
(1)
(4)
(5)
CURE
(2)
(1)
(2)
13