Safety; General Specifications - Domus DMP30136 Manual De Uso Y Mantenimiento

1. SAFETY

Read this manual before using or installing the ironer.
Keep this manual in a safe place for use in subsequent configurations.
This manual must be handed over with the machine if it is sold to somebody else.
Only use the machine for professional ironing of textile fibres after washing in water.
Do not leave petrol or other inflammable liquids or gases near to the ironer.
Do not iron products that have been treated or that give off inflammable vapours or elements.
Always bear in mind the instructions described on the labels of the materials to be ironed.
Do not leave the ironer operating unattended.
Do not allow fluff, dust or dirt to build up around the machine.
Do not spray the ironer with water.
Do not leave the hot part of the ironer in contact with the roller when you finish working. There is a risk of
burning the roller if it is not moving.
Maintenance and installation can only be carried out by qualified personnel.
Close or disconnect all the power supplies of the machine at the end of each working day and before
removing any protective cover either for cleaning, maintenance or tests.
Do not put tools or your hands inside the parts that are moving (motor, chain, etc.).
Do not remove or override the machine's safety devices.
The manufacturer reserves the right to make future modifications without prior warning.

2. GENERAL SPECIFICATIONS

Our ironers in their different models and complements have been designed to meet the highest
operating, reliability and drying capacity requirements.
As standard the machine comes equipped with the system that moves the hot part of the ironer away
from the roller making sure that it does not burn if the machine stops when the plate is still very hot.
Basic equipment:

Electrical heating system with set of 3 tubular resistances.

Heat transmission system with top quality anodised aluminium plate.

Automatic plate movement system.

Intelligent microprocessor with alarm indication.
Optional equipment:

Power supply at 60 Hz.
20