Tabla De Contenido; Work Safety Instructions - bioSan Assistboy Manual Del Usuario

TABLE OF CONTENTS
1 - INTRODUCTION .............................................................................................................. 2

2 - WORK SAFETY INSTRUCTIONS ..................................................................................... 2

3 - LIMITATIONS OF USE ..................................................................................................... 3
4 - TO SWITCH ON THE ASSISTBOY .................................................................................. 3
5 - ASPIRATING AND DISPENSING LIQUIDS ...................................................................... 3
6 - TROUBLESHOOTING ...................................................................................................... 4
7 - REPLACING THE FILTER ................................................................................................. 6
8 - CHARGING THE BATTERY .............................................................................................. 6
9 - MAINTENANCE ................................................................................................................ 7
10 - COMPONENTS ................................................................................................................ 7
11 - ORDERING INFORMATION ............................................................................................. 8
12 - SPARE PARTS .................................................................................................................. 8
13 - PRODUCT DISPOSAL ......................................................................................................8
1
1 - INTRODUCTION
The Assistboy pipette controller is a device intended for pipetting liquids with the use of
measuring pipettes. It can work with all types of glass or plastic pipettes in the volume
range from 0.5 ml to 100 ml.
Two dispense modes permit selection of dispensing intensity depending on the user's
needs. The selected setting of the pipette controller mode is shown on the display (fig. 1E)
Fig. 1 shows the external parts of the pipette controller with a description of the materials
used.
Display indicators are shown in fig. 2.
2 - WORK SAFETY INSTRUCTIONS
Before starting the work with the Assistboy every user should read these operating instruc-
tions carefully.
Using the device inconsistently with the operating instructions may result in damaging
the device.
The device should be maintained only at an authorised service centre, otherwise the manu -
fac turer will be relieved from any liability under the warranty.
• During the work with the Assistboy general safety regulations regarding risks related with
laboratory work should be observed. Protective clothing, goggles and gloves should be
worn.
• The Assistboy shall be used only for measuring liquids in conditions specified
by the ma nufacturer, which are limited due to the chemical and mechanical resistance
of the device, as well as the user safety.
• The pipette controller should not be used in an environment where explosion risk is present.
• The information and instructions provided by the manufacturers of the reagents must
be observed.
• Only original spare parts and accessories, recommended by the manufacturer, shall be used.
• Only the original charger, supplied by the manufacturer, shall be used for charging
the battery.
• In case of incorrect functioning of the pipette controller, work shall be stopped. The
device shall be cleaned in accordance with the operating instructions and/or sent for
repair to an authorised service centre.
• In the case of mechanical damage to the casing, the device shall be immediately sent
for repair to an authorised service centre.
• The use of excessive force during work shall be avoided.
ENGLISH
2