Cleaning The Machine - Makita XBU04 Manual De Instrucciones

NOTICE:
Do not allow wet materials, such as
wet leaves, and foreign materials, such as large
wood chips, metals, glass, pebbles, etc., to be
sucked into the machine. Otherwise, a malfunction
may occur.
NOTICE:
Empty the dust bag before it becomes
full. Otherwise, a malfunction may occur.
NOTICE:
To prevent the suction of foreign mate-
rials, operating the machine in the vacuuming
mode is recommended.
1. Put the shoulder strap and dust bag on the shoul-
der as shown in the figure. Adjust the length of the
strap.
3
4
► 1. Shoulder strap 2. Carry handle 3. Assist handle
4. Dust bag
2.
Hold the carry handle with your right hand and the
assist handle with the other hand.
3.
While operating the machine, adjust the switch
trigger so that the suction force is appropriate for the
work location and conditions.
MAINTENANCE
CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

Cleaning the machine

Clean the machine by wiping off dust with a dry cloth or
one dipped in soapy water and wrung out.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
1
cracks may result.
Remove dust or dirt from the suction inlets.
2
► 1. Suction inlet
12 ENGLISH
Always be sure that the machine is
1