Fan Assembly. Pgs - Craftmade Phaze PHA52 Guia De Instalacion

5. Fan Assembly.
Remove 6 screws and washers from yoke
plate (located on top plate on top of motor
housing) and set aside. Lift yoke plate and top
plate to remove from motor housing and set
aside.
Locate blade attachment screws/washers in
hardware pack. Slide blade through one of
the rectangular openings on center band of
motor housing, aligning holes in blade with
holes in blade arm (located inside motor
housing). Insert 3 blade attachment
screws/washers with fingers first and then
tighten screws securely with a Phillips
screwdriver. Repeat procedure for each
remaining blade.
WARNING: To reduce the risk of serious
bodily injury, DO NOT use power tools to
assemble the blades. If overtightened, blades
may crack and break.
Re-attach top plate and yoke plate to yoke
using washers and screws previously
removed. Be sure that cutouts on top plate and
yoke plate aligns over yoke set screws for a
proper fit. Tighten screws to secure top plate
and yoke plate.
["Fan Assembly" continued on next page.]
yoke
blade
arms
page 5
yoke plate
top plate
blade attachment
screws/washers
center band
on motor housing
blade
arms
reverse switch
blade