Operation Mode; Port Setup - Steren COM-840 Manual De Instrucciones

4.13.1. Operation Mode

Gateway: In this mode, the device is supposed to connect to internet
by DHCP/ PPPoE/ Static IP mode. NAT rules are enabled and devices
connected to the four LAN ports or through a wireless connectionshare the
same IP to ISP through the WAN port.
Bridge: In this mode, all Ethernet ports and wireless connections are
bridged together and NAT rules are disabled. All the WAN related functions,
Virtual service, DMZ, QoS and firewall functions are not supported.

4.13.2. Port Setup

Port Setup: Here you can set the router's WAN and LAN interfaces to
work at 100M duplex, 100M half-duplex,10M duplex and 10M half-duplex
communication modes.
55