Braun TempleSwipe BST200US Manual Del Usuario página 13

Operating temperature:
Automatic Switch-off:
Weight:
Long term storage ranges
Storage/transport temperature:
Humidity:
Battery:
Pressure:
This thermometer is an adjusted mode thermometer that provides an oral equivalent reading.
See
instruction
for use
IP22: Protected against solid foreign objects of 12.5 mm diameter and larger. Protected against water
drops falling vertically when the device is tilted up to 15°.
This infrared thermometer meets requirements established in ASTM Standard E 1965-98 (for the
thermometer system). Full responsibility for the conformance of the product to the standard is assumed
by Kaz USA, Inc., a Helen of Troy Company, 400 Donald Lynch Blvd., Suite 300, Marlborough, MA 01752
ASTM laboratory accuracy requirements in the display range of 37 to 39°C (98 to 102°F) for IR
thermometers is ±0.2°C (±0.4°F), whereas for mercury-in-glass and electronic thermometers, the
requirement per ASTM Standards E667-86 and E1112-86 is ±0.1°C (±0.2°F).
This device conforms to the following standards:
ASTM E1965-98 - Standard Specification for Infrared Thermometers for Intermittent Determination of
Patient Temperature.
ISO 80601-2-56 – Medical electrical equipment – Part 2-56: Particular requirements for basic safety
and essential performance of clinical thermometers for body temperature measurement.
ANSI AAMI IEC 60601-1 - Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance.
IEC 60601-1-2 - Medical electrical equipment - Part1-2: General requirements for basic safety
and essential performance - Collateral Standard: Electromagnetic disturbances – Requirements
and tests.
NOTE: DO NOT use this device in the presence of electromagnetic or other interference outside the
normal range specified in IEC 60601-1-2.
IEC 60601-1-11 - Medical electrical equipment - Part 1-11: General requirements for basic safety
and essential performance -- Collateral standard: Requirements for medical electrical equipment and
medical electrical systems used in the home healthcare environment.
ISO 10993-1 - Biological evaluation of medical devices – Part 1: Evaluation and testing within a risk
management process.
ISO 15223-1 - Medical devices - Symbols to be used with medical device labels, labeling and infor-
mation to be supplied - Part 1: General requirements.
Internally Powered Equipment
MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC.
For detailed description of EMC requirements please contact Consumer Relations.
Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL EQUIPMENT.
59 °F – 104.0 °F (15 °C – 40 °C)
Approx. 60 seconds after last measurement has
been taken
3.51oz. (with batteries), 2.72oz. (w/o batteries)
–13 °F to 131 °F (–25 °C to 55 °C)
15–95% non condensing
(2) AAA Batteries - 1,000 continuous readings
without replacing battery(s) after 2 years storage
700-1060 hPA (0.7-1.06 atm)
Operating
Type BF
+104°F
temperature
Applied Part
+59°F
Storage /
+131°F
Transport
-13°F
Temperature
11