Braun TempleSwipe BST200US Manual Del Usuario página 8

Position
3
Position the thermometer touching the forehead,
just above the eyebrow. Be sure to hold the
thermometer flush against the forehead. If the
eyebrow area is covered with hair, sweat or dirt,
please clean the area beforehand to improve the
reading accuracy.
NOTE: ALWAYS remove the protective scanner
cap before taking a temperature reading.
Take temperature
4
Press the "Temperature button" and slowly
swipe diagonally down the forehead to the
temple and then back. Be sure to hold the
thermometer flush against the forehead for the
duration of the measurement.
When the temperature button is pressed a
dashed line will appear on the screen and a soft
beeping is heard to let you know the
thermometer is working. DO NOT remove the
thermometer from the forehead until you hear
the long, 2-second confirmation beep.
Read temperature
5
At the confirmation beep, remove the
thermometer from the forehead and
read the temperature. The screen will
illuminate the appropriate color for the
temperature reading. Green for a normal
temperature, yellow for a fever, and red
for a high fever.
To repeat
Go to step 3.
To turn off
6
Press the power button. To conserve battery power,
the unit will automatically shut down after 60 seconds
of no use.
6
High fever
Fever
Normal