smartheart 01-509 Guia De Inicio Rapido

Blood Pressure Monitor
Model # 01-509, 01-509-HSN, 01-509BL-HSN
1 2
THIS QUICK START GUIDE IS INTENDED
AS A SUPPLEMENT TO THE INSTRUCTION
MANUAL. PLEASE READ THE COMPLETE
MANUAL PRIOR TO FIRST USE.
Before applying your blood pressure cuff, be sure you
have selected the appropriate size cuff:
Adult Cuff fits arm circumference:
8.6" to 16.5" inches (about 22 – 42 cm)
A 15 minute resting period is needed to stabilize the
body prior to taking a reading. No eating, drinking or
smoking while resting.
Applying the Arm Cuff
Remove any constrictive clothing
or jewelry that may interfere
with cuff placement. Wrap the
cuff snugly around your left
arm. Position the cuff's bottom
edge one inch ABOVE the
elbow joint. Apply the cuff to
your left arm so that the digital
display face is positioned on
the inside area of your arm
facing you, and the word 'ELBOW'
is centered over the inside bend of
your elbow.
IF YOU HAVE ANY QUESTIONS OR ARE EXPERIENCING DIFFICULTIES, PLEASE CALL THE TOLL-FREE
CUSTOMER SERVICE HELP LINE FOR FURTHER ASSISTANCE AT 1-866-326-1313.
Taking the Measurement
Please read the preceding portions of this manual prior to
taking your first reading.
Reminder, it is important to avoid smoking, eating, taking
medication, alcohol consumption or physical activity 30
minutes prior to taking a reading.
The switch at the top of the device must be in the ON
position to take yourmeasurement; it
will not take a reading if not in the ON
position.
Select the desired user, 1 or
2, before measurement; this
selection will determine where
the measurement is stored for
review.
1. Rest your elbow on a solid surface with
your palm facing upward. Elevate your
arm so that the cuff is at the same level
as your heart, Fig 1. Be certain that cuff
is elevated to the proper level; you may
choose to support your hand with a folded
towel or book. Relax your left hand.
2. When the monitor is off, press the U1/
SET or U2 (POWER) button to POWER
on the monitor; the unit will run a self test,
Fig 2.
3. The display will briefly show a '0' before
the measurement begins.
4. You will see the numbers increase on the
digital display during measurement as the
cuff inflates.
5. When the measurement is complete, the
cuff will automatically deflate and your
blood pressure measurement and pulse
reading results will show on the display
screen at the same time, Fig 3.
6. Consult the included Instruction Manual
for information on interpreting your
reading results.
7. The reading will automatically be stored in the USER
Memory Bank selected at the start of the reading, up
to 250 readings per user.
8. Select U1/SET or U2 button to turn the unit off and
conserve energy and battery life.
9. The unit will automatically shut-off approximately 1
minute after use.
Please Note:
• You can stop the inflation or deflation process of the
cuff at any time by pressing the U1/U2 button.
• Many factors such as genetics, age, sex, altitude,
physical activity, anxiety, muscular development,
Fig. 1
certain medications or even the time of day can
influence blood pressure.
• Blood pressure varies from moment to moment; even
readings taken after proper rest periods can vary.
Home blood pressure readings may vary as much as
10-20 points from ones taken at your doctor's office.
• Variations in your individual readings should only be
interpreted by your physician or trained health care
professional.
• We encourage you to consult with your physician
to achieve the maximum benefit from your blood
pressure monitor.
Fig. 2
Fig. 3
#93-2135 11/19
©2019 Veridian Healthcare, LLC