STEP 1 - CHARGING THE PARENT UNIT
1
2
3
15
WARNING
STRANGULATION HAZARD.
Children have STRANGLED in cords.
• Keep adapter cords out of the reach of children
(more than 3 feet [0.9 m] away).
• Because of the serious strangulation risk to infants
and toddlers, parents and caregivers should never
place the Nursery Unit within 3 feet (0.9 m) of a crib.
• NEVER use extension cords with AC adapters. ONLY
use the AC adapters provided. This product is not a
toy. Never allow children to play with it.
1.1 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the Adapters from both units.
•
If Nursery Unit Power Indicator
does not show or when the Nursery
Unit's green light flashes replace the
batteries.
•
If the Parent Unit and its screen
do not light up, recharge the batteries.
8
IMPORTANT
Never use regular
alkaline batteries
in the Parent Unit;
they may explode.
1) Remove the battery door and insert
the Rechargeable Batteries (included).
2) Connect the AC Adapter to the Parent
Unit and into an electrical outlet.
3) Charge the unit for 15 continuous
hours (prior to first use).
NOTE:
To optimize your battery performance
please refer to Battery Guidelines in
the Trouble Shooting section.
The Power Indicator
on the Nursery Unit
The Low Battery Indicator
on the Nursery Unit
BATTERY ALARM
•
Alarm activates when the batteries need to be recharged.
•
Parent Unit will emit a beep sound every 15 seconds.
Battery Alarm icon will flash on screen.
•
HOW TO CHARGE THE BATTERIES
IN THE PARENT UNIT:
Leave the Parent Unit in the Charging
Cradle to fully charge the unit. Although
the batteries at 1/2 capacity works
normally, we recommend that you fully
recharge them.
empty
1/2 full
full
PARENT UNIT:
A
H
B
E
C
D
F
I
G
Front Side
A) LCD Screen
B) Power ON/OFF
C) Channel Key
(8 channels)
D) Temporary mute key
E) Sound Volume
Up/Down
F) Speaker
G) Charging Cradle
H) Belt Clip
I) Battery Door
Back Side
E
N
9