sunjoe 24V-X2-BVM190-CT Manual Del Operador página 11

Fig. 8
3. With the blower tube removed, insert the "wedged" end of
the mulcher tube into the slot on the unit. Securely fasten
the mulcher tube by pushing the 2 tabs on the mulcher
tube until they snap into the holes on the housing (Fig. 9).
Fig. 9
4. Insert the collection bag adaptor into the air outlet until
the collection bag is securely fastened, then clip the bag
to the strap holder (Fig. 10). Simply press the tube release
button to remove the bag (Fig. 11).
Fig. 10
Strap holder
Collection bag
Inlet cover
lock button
Inlet cover
Vacuum tube
Tabs
Wedged end
Slot
Air outlet
Collection
bag adaptor
Fig. 11
5. To remove the vacuum/mulcher tube assembly, press the
inlet cover lock button to unlock, then remove the tube
assembly from its housing (Fig. 12).
NOTE: It may be necessary to remove the blower tubes or
vacuum/mulcher tubes to clear a blocked tube or impeller.
Make sure to remove the batteries before attempting to
clear any obstructions.
Fig. 12
6. Clip the shoulder support strap to the strap hook on the
top of the blower, as shown (Fig. 13).
Shoulder strap clips
Fig. 13
7. To adjust the length of the strap, push it from one end to
form a loop above, and let out as needed, then pull the
strap from the other side to tighten (Figs. 14 – 15).
11
Tube release
button
Inlet cover lock button
Vacuum tube
Shoulder strap hook