Kohler K-852 Diagrama De Instalación página 2

K-852-HB
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
8" (20.3 cm)
Max
16"
(40.6 cm)
1-5/8"
(4.1 cm)
2-1/2"
(6.4 cm)
Product Information
Custom pump K-852-HB
Custom pump K-852-HE
Required accessories:
Jet trim kit K-9696
Fixture*: Basin area
Bathing 40-1/2" (102.9 cm)
well x 20" (50.8 cm)
Water depth
To 13-5/8" (34.6 cm)
overflow
* Approximate measurements for comparison only.
Pump Heater
1.5 hp 1.5 kW
* Approximate measurements for comparison only.
Drop-in for cut-out 58-1/2" (146.6 cm) x 30-1/2" (77.5 cm)
Cut-out for undermount
1019495-1-C
6" (15.2 cm) Max
1" (2.5 cm) Max
14" (35.6 cm)
60" (152.4 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
shown
shown (top view only)
Top area
52-3/4" (134 cm) x
24" (61 cm)
Capacity
60 gal (227.1 L)
V A*
240 11
K-586 template
No change in measurements if connected with drain
illustrated. (K-7169-AF or K-7169M-AF)
K-852-HE
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
1/4" (6 mm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
Installation Notes
Weight
290 lbs
Install this product according to the installation guide.
(131.5
Cast iron whirlpools are extremely heavy, making some drop-in
kg)
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Floor support under whirlpool must provide for a minimum of
1200 lbs (544.3 kg).
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
Fixture conforms to ASME Standard A112.19.1M. All dimensions
are nominal.
2
32" (81.3 cm)
3/4" (1.9 cm)
18-1/4"
(46.4 cm)
208-240 V, 20 A, 50/60 Hz
1-1/2" OD
Kohler Co.