Intended Use - Graham Field LUMEX LX8000 Instrucciones De Operación Y Asamblea

INTENDED USE

The Knee Walker is a mobility device intended for use by individuals who are unable to bear
weight on the lower extremity of one leg. The device features a folding frame with height
adjustable handle and knee pad to support the injured leg, while allowing the other leg to be used
for propulsion.
WARNING: DO NOT sit on the Knee Walker and self propel. DO NOT use the Knee Walker
as a wheelchair or transport chair.
UNPACKING
1. Carefully remove all components, shown and listed below, from carton.
knobs
Item Quantity
1 1
2 1
3 1
ASSEMBLY (REFER TO PICTURES)
Secure handle bar
1. Rotate the handle bar up to vertical position
as shown at right.
2. Rotate the handle bar lock clip up to lock it
as shown at far right.
3. If the handle bar is wobbly and insecure
in the base, open the lock clip and turn it
clockwise to tighten it; if the handle bar
is too tight, open the lock clip and turn it
counterclockwise to loosen it.
4. Close the lock clip to secure handle bar.
WARNING: Ensure the lock clip is locked
and the handle bar is secure before
proceeding.
LX8000-INS-LAB-RevA19
knee pad
pin
LX8000 Knee Walker components
Description
Handle Bar
Frame with Wheels
Knee Pad
handle bar
storage bag
Item Quantity
4 2
5 1
6 1
handle bar in
horizontal position rotated up to
(as shipped) vertical position
handle bar lock clip
shown unlocked
Secure handle bar
frame
Description
Knob
Pin
Storage Bag
handle bar handle bar lock clip
shown locked
2