Graham Field LUMEX LX8000 Instrucciones De Operación Y Asamblea página 3

Install knee pad
1. Insert the knee pad post into the frame
receptacle; the knee pad post has a series of
height adjustment holes, shown at right, that
interface with the frame receptacle hole.
Choose the height adjustment hole that will
provide the desired knee pad height before
proceeding.
2. Ensure holes are aligned, and insert the
locking knob through the desired knee pad
post hole into the frame receptacle hole.
3. Turn the knob clockwise until fully
tightened.
4. Insert the pin and lock it into place as shown at right.
WARNING: Ensure the pin is locked and the knee pad is securely locked into the frame
receptacle before proceeding.
Adjust handle bar height
Info: Consult your healthcare professional to determine proper
handle bar height adjustment. We recommend adjusting handle
bar height while standing, with the good leg straight and the
injured leg resting in the center of the knee pad.
1. Unscrew the two-piece knob to release the handle bar
assembly from the steering column.
2. Place the handle bars at the desired height inside in the
steering column, choosing the height adjustment hole that
will provide the desired handle bar height before proceeding.
3. Ensure holes are aligned. Install the knob through the handle
bar assembly and steering column holes into the back piece
of the knob.
4. Turn knob clockwise until fully tightened.
Install storage bag
1. Install storage bag in front of handle bars, as shown at right,
with pouch facing forward and handle at top.
2. Secure storage bag securely with the three hook and loop
straps around handle bar shaft and both handle bars as
shown at right.
LX8000-INS-LAB-RevA19
knee pad
height
adjustment
holes
Install knee pad
handle bar
assembly
steering
column
knee pad
post
knob
pin
frame
receptacle
frame
knob
Adjust handle bar height
handle
hook and
loop straps
handle bar
assembly
Install storage bag
3