Final Assembly - Emerson VERANDA CF542ORB00 Manual Del Usuario

6.1
Screw the Two Threaded Studs (supplied) into the
Tapped Holes in the Hanger Bracket (Figure 27) .
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the Holes in the
Ceiling Cover (Figure 28) .
6.3
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the Two Knurled Knobs (supplied) (Figure 28) .
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the Ceiling and the Hole in the
Ceiling Cover is clear of the Downrod .
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.

6. Final Assembly

Figure 27
NOTE: SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.
THREADED
STUDS (2)
Figure 28
17
THREADED
STUDS (2)
Please contact 1-800-654-3545 for further assistance
CEILING
COVER
LOCKWASHERS (2)
KNURLED KNOBS (2)
emersonfans.com
U.L. Model No.: CF542 & CF552