TILLER CONSOLE
The tiller console houses all controls needed to drive your scooter, including the battery condition meter, tiller
display, and twist throttle. See fi gure 11.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller console
has dried thoroughly.
Figure 11. Tiller Console
Power Button
Push power button on battery pack to turn your scooter on. The power button also acts as the main ciruit
breaker. See fi gure 12.
Twist Throttle
The twist throttle allows you to control the forward speed of your scooter.
Place your right hand on the right handgrip and your left hand on the left handgrip.
Use your right thumb to press the twist throttle control downward in order to control speed of forward movement.
To slow your scooter, apply the handbrake.
When the twist throttle is released, it automatically returns to the "stop" position.
Handbrake Lever
Engage handbrake lever to slow or stop your scooter.
Battery Condition Meter
When the power button is pressed to power up your scooter, this meter indicates the approximate battery voltage
strength on your tiller display. For further information on battery charging, see III. "Batteries and Charging."
Drivetrain Assembly
The drivetrain assembly is an electromechanical unit that converts electrical energy from your scooter's batteries
into the controlled mechanical energy that drives the scooter's wheels.
iRIDE
I I . Y O U R S C O O T E R
IDENTIFICATION KEY
1. Handbrake Lever
2. Tiller Display
3. Speed Up Button
4. Mode Select Button
5. Hand Grip
6. LCD Display
7. Speed Down Button
8. Twist Throttle
9. Parking Brake Pin
23