KTM Power Parts 60005099300 Guia De Inicio Rapido página 6

1
6
5
8
7
- Insert the new gasket (included) into the main silencer (included).
- Insert the bushings (1) (included) on both sides of the tab.
2
3
Carefully push the main silencer onto the manifold.
- Mount the main silencer using the M8x35 screw (2) and M8 thin nut (3).
NOTE:
Do not tighten the screws yet.
1
1
- Grease the original screws (4) with copper paste and mount them.
- Position the entire system so it is tension-free and tighten the screws.
NOTE:
Repeat the same procedure for the second main silencer.
4
4
- Position the side parts and mount them on the left and right using screws
(5) and (6).
5
5
6
- Position both racks and mount them using the original screws.
- Position the top case plate (7) and mount it using the original screws (8)
9
and (9).
7
- Mount the seat (10) (see the owner's manual).
10
Spare parts:
Noise damping insert
Rock wool kit
60005099020
60005099010