Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NEXA MODULAR G2 VIDEO DOOR ENTRY SYSTEM - BUILDING
+
SAFETY PRECAUTIONS
-
Always disconnect the power supply
before installing or making modifications to the device
- The fitting and handling of these devices must be carried out by authorised personnel.
- The wiring must run at least 40 cm away from any other wiring.
- On the power supply unit (FA-G2 ):
+
Do not overtighten the screws on the connector.
w
Install the power supply unit in a dry and protected place free from the risk of water leaks or sprays.
w
Avoid locations that are humid, dusty or near heat sources.
w
Ensure that the air vents are free from obstruction so that air can circulate freely.
w
To avoid damage, the power supply unit must be firmly secured in place.
w
To prevent electric shock, do not remove the cover or handle the wiring connected to the terminals.
w
( )
CHARACTERISTICS
*
- Video door entry system with simplified wiring (non-polarised 2-wire bus).
- Up to 4 access panels (
DPM-G2+ multiplexer
- Up to
32
monitors and apartments with
ART 4
- Up to
32
monitors and apartments with
ART 7H
- Up to 32 monitors and apartments with ART 7W G2+ monitor per installation. Only the master monitor
can activate Wi-Fi transmission (FA-ART 7W power supply unit required for apartment).
- Up to monitors per apartment.
4
- Up to 12 monitors in parallel (installation without distributors) per installation.
-
Sound module EL632
G2+ SE
with pan and tilt mechanism to adjust the telecamera position.
- Call confirmation tone.
- Visual signals on the door panel for people with impaired hearing (indicating call process,
communication, door open and channel busy).
- Audible signals on the door panel for people with impaired vision (indicating call in progress, missed
call, door open, call finished and engaged).
- Door opening timeable from monitor (up to 10 seconds), see corresponding monitor user manual.
- Relay 1 and relay 2 output to activate the DC or AC lock releases actuated by relay.
SYSTEM OPERATION
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is
being made and LED
will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears
indicating that a call is being made. At this moment, the apartment's monitors receive the call. If another
apartment is called by mistake, press the button for the correct apartment and the first call will be cancelled.
- In systems with several access doors, the other door panel(s) will be automatically disconnected. If another
visitor tries to call, a number of telephone tones will be heard to indicate that the system is busy and LED
will illuminate. If vocal synthesis is activated, the message "System is busy, try later" will be indicated on
the door panel..
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists)
without the visitor knowing and icon
displayed on the screen will blink green. To view the image from slave
monitors 2 or 3,
press on one of the buttons of the ART 4/ ART 7H monitor or
monitor for the image to appear. If the call is not answered within 45 seconds, LED
system will become free.
- To establish communication,
press the button below off-the-hook icon
off-the-hook icon
on the screen
of the ART 7W monitor
turn on If the door panel has an EL3002H module with icon
.
module will illuminate. Make sure that the hearing aid is 15 - 20 cm away from the door panel to ensure
maximum audio quality during communication with the apartment.
- Connection will last for 90 seconds or until
is pressed the button below
monitor or
is pressed on-the-hook icon
on the screen
LED
will turn off and the system will become free. If vocal synthesis is enabled, a 'Communication is finished'
message will indicate that the call is over.
-
To open door
or
of the door panel
,
press the corresponding button below of the ART 4 /ART 7 monitor
1
2
or
press the corresponding icon
on the screen
processes: one press will activate the lock release for seconds and LED
vocal synthesis is enabled, a 'Door open' message will be indicated on the door panel.
is
-
Detailed operation
and configuration
of the monitor
( ) For more information, see the T632 G2+ SE user manual (code 50122528).
*
https://doc.golmar.es/search/manual/50122528
required for more than one access panel) per installation.
G2+ / ART 4 LITE G2+
monitor per installation.
G2+ / ART 7 LITE G2+
monitor per installation.
press the screen
of the ART 7W
will turn off and the
of the ART 4 / ART 7H monitor or
. Door panel LED
will turn off and the led
displayed on the front, the LED of the EL3002H
on-the-hook icon
of the ART 4/ ART 7H
of the ART 7W monitor
. When communication ends,
H
of the ART 7W monitor
during the call or communication
3
will also turn on for seconds. If
3
, see
the corresponding monitor
user manual
.
2
NEXA MODULAR G2 VIDEO DOOR ENTRY SYSTEM - BUILDING
( )
INSTALLATION OF THE DOOR PANEL
*
s.
1650
EL632 G2
P2
C d Monitor
o e
ON
DIP
C.127
( )
1 2 3
4 5 6 7
8
2
ON
DIP
C. 10
1 2 3
4 5 6 7
8
ON
DIP
C. 08
1 2 3
4 5 6 7
8
ON
DIP
C. 06
1 2 3
4 5 6 7
8
ON
DIP
C. 04
1 2 3
4 5 6 7
8
ON
DIP
C. 02
1 2 3
4 5 6 7
8
( )
Note: EL632 G2+ SE module V04 & later, factory default with the call code " 2 " in P1 & "127" in P2
2
If you want to change call code of the button P1 & P2, see page 28 of the "T632 G2+ SE" user manual.
( )
*
Description and settings:
-
Description of the sound module
-
Description of the visual signals on the door panel.
-
Description of the door panel lighting LEDs (for low light conditions).
-
Description of the vocal synthesis (audible signals on the door panel).
-
Adjusting the vocal synthesis
- Adjusting
the telecamera pan and tilt mechanism .
( )
*
press
Audio level jumper description (vocal synthesis and tones mode):
will
Audio level jumper is located on the left side of the back module.
The jumper for volume control, allows to select between a minimum, maximum
or mute of the vocal synthesis and tones mode from
1
2 3
Jumper placed between 2 and 3, set to minimum volume the vocal synthesis
1 ( )
and tones from the door panel.
1
2 3
Jumper placed between 1 and 2 set to maximum volume the vocal synthesis
and tones from the door panel.
1
2 3
Jumper removed, set to mute volume the vocal synthesis and tones from the
door panel.
1 ( )
Factory default.
( ) For more information, see the T632 G2+ SE user manual (code 50122528).
*
https://doc.golmar.es/search/manual/50122528
EN
+
Embedding box dimensions:
M dul s
o
e
1
2
Model
N
CE 90C
V
S
N
CEV90C
1850
1450
W
(width)
99
99
H
(height)
132,5
238
D (depth)
56,5
56
/
+ SE
C d Monitor
o e
ON
DIP
C. 30
1 2 3
4 5 6 7
8
ON
DIP
C. 28
1 2 3
4 5 6 7
8
P1
ON
DIP
C. 26
1 2 3
4 5 6 7
8
ON
DIP
C. 24
C d Monitor
o e
1 2 3
4 5 6 7
8
ON
DIP
ON
DIP
C. 22
C.128
( )
1 2 3
4 5 6 7
8
1 2 3
4 5 6 7
8
2
EL610D
ON
DIP
ON
DIP
C. 09
C. 20
1 2 3
4 5 6 7
8
1 2 3
4 5 6 7
8
ON
DIP
ON
DIP
C. 07
C. 18
1 2 3
4 5 6 7
8
1 2 3
4 5 6 7
8
ON
DIP
ON
DIP
C. 05
C. 16
1 2 3
4 5 6 7
8
1 2 3
4 5 6 7
8
ON
DIP
ON
DIP
C. 03
C. 14
1 2 3
4 5 6 7
8
1 2 3
4 5 6 7
8
ON
DIP
ON
DIP
C. 1
0
C. 12
1 2 3
4 5 6 7
8
1 2 3
4 5 6 7
8
EL632 G2+ SE
DIP switch
.
language/
volume
and
the P1 and P2 external buttons.
(
)
the
door panel.
,
3
3
CEV90
99 mm.
328 mm.
56 mm.
EL610D
C d Monitor
o e
ON
DIP
C. 29
1 2 3
4 5 6 7
8
ON
DIP
C. 27
1 2 3
4 5 6 7
8
ON
DIP
C. 25
1 2 3
4 5 6 7
8
ON
DIP
C. 23
1 2 3
4 5 6 7
8
ON
DIP
C. 1
2
1 2 3
4 5 6 7
8
EL610D
ON
DIP
C. 19
1 2 3
4 5 6 7
8
ON
DIP
C. 17
1 2 3
4 5 6 7
8
ON
DIP
C. 15
1 2 3
4 5 6 7
8
ON
DIP
C. 13
1 2 3
4 5 6 7
8
ON
DIP
C. 1
1
1 2 3
4 5 6 7
8
1 8
.
1 ( )
1
2 3
1
_
+
C1 NA1
Relé 1
EN
Publicidad
Tabla de contenido
