Predator PUR80WIFI Manual De Uso página 27

AIR QUALITY INDICATION
Colour Air quality
Blue Very good
Purple Good
Deep purple Fair
Red Bad
Note: The air quality light ring automatically goes on when the appliance
is switched on.
The appliance automatically starts operating in the AUTO
mode. To switch off the appliance, press the on/off button again and unplug
the appliance.
re
Note: When the humidity level in the room is very high, it is possible that
the air quality sensor has some condensation. As a result, the AIR QUALITY
light in the control panel and the air quality light ring may indicate that the
air quality is bad even though the air quality is good, In this case, the auto
mode causes the appliance to run at high fan speed. You can solve this by
cleaning the air quality sensor. If condensatiom develops frequently during
periods of high humidity, we advise you to use one of the manual speed
settings.
Fan speed lights/fi lter replacement lights
The lights on the left hand side of the control panel have double function:
they either indicate the fan speed or they indicate that the fi lters should be
replaced or cleaned.
- When lights 1 to 2 lights up constantly, they indicate the current fan spped.
- When light 1 fl ashes , you have to clean the prefi lter. When lights 2 fl ashes,
you have to replace the fi lter.
- When light 2 and the REPLACE FILTER light are fl ashing continuosly, the
fi lter has to be replaced, and the appliance is locked ( see chapter " Filter
replacement lock" for more information)información).
www.glaziar.com / info@glaziar.com
27