Predator PUR80WIFI Manual De Uso página 35

Put fi lter 1 (HEPA fi lter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you
Put fi lter 2 ( Activated Carbon fi lter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
Put fi lter 3 (Pre-fi lter) back into the appliance.
Note: Make sure that the side with the two tabs is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
To reattach the front panel, insert the bottom hooks into the bottom of the
appliance fi rst (1) . Then push the panel against the body of the appliance (2).
Put the plug in the wall socket and switch on the appliance again.
Press the fi lter reset button with a thin tool.
Note : You do not need to press the fi lter reset button after cleaning fi lter 1 (pre-fi lter).
Note : You cannot reset the appliance when you replace a fi lter before its fi lter repla-
cement light starts fl ashing.
Note: You cannot reset the appliance if it is not plugged in and switched on.
www.glaziar.com / info@glaziar.com
35