Beninca IRI.KPAD Guía Rápida página 24

Function
if the acoustic indicator is to
be activated
1
if the acoustic indicator is to
be deactivated
if the back light is to be
activated
2
if the back light is to be
deactivated
Enable re-activation with
asterisk key ()
3
Disable re-activation with
all keys.
Enable before pressing
reactivation+code
4
Disable before pressing
reactivation+code
Enable 3 min. block after 5
wrong codes
5
Disable 3 min. block after 5
wrong codes
MENU 7 (OPERATION AS PROXIMITY SWITCH)
By activating this function, the keypad sends a radio control also when the system
is activated (first touch).
This might be useful, for example, to activate a courtesy light in the keypad area.
Around 2 seconds are needed for this function at every activation of the device.
During this period of time it is not possible to type any access codes.
After typing key 7, the function activation phase is entered, indicated with 2 beeps
followed by an interval. In the factory configuration this function is disabled.
- Type in 1 if the function is to be activated
- Type in 0 if the function is to be deactivated.
If 1 is typed in, three beeps followed by an interval are heard.
The device awaits for the command to specify the coding type of the code which
will be transmitted when the IRI.KPAD is activated.
- Type 1 > (2 beeps) if a Rolling-Code is desired.
- Type 2 > (2 beeps) if an Advanced rolling code (ARC) is desired.
24
Sequence
Press 1 (4 beeps) then Press 1
(2 beeps as confirmation)
Press 1 (4 beeps) then Press 0
2 beeps as confirmation)
Press 2 (4 beeps) then Press 1
(2 beeps as confirmation)
Press 2 (4 beeps) then Press 0
(2 beeps as confirmation)
Press 3 (4 beeps), then press 1
(2 beeps confirm)
Press 3 (4 beeps), then press 0
(2 beeps confirm)
Press 4 (4 beeps), then press 1
(2 beeps confirm)
Press 4 (4 beeps), then press 0
(2 beeps confirm)
Press 5 (4 beeps), then press 1
(2 beeps confirm)
Press 5 (4 beeps), then pres 0
(2 beeps confirm)