Beninca IRI.KPAD Guía Rápida página 3

Entering an Administrator PIN*:
1. Press any key to activate the keyboard.
2. Type 123456 [default password], followed by #.
3. Press key 2 (2 beeps followed by a pause).
4. Type the Administrator PIN you want to insert (1 to 9 digits),
followed by # (3 beeps followed by a pause)
5. Type 2 for ARC-type receiving devices (or 1 for HCS or 3 for
fixed code).
6. The device emits 2 beeps and exits programming. The Ad-
ministrator PIN is registered in the memory.
Sending the stored code:
7. Press any key to activate the keyboard.
8. Type the previously stored Administrator PIN, followed by #.
9. 2 beeps and two flashes of the green central LED signal the
successful radio transmission of the PIN.
*IMPORTANT:
This procedure stores a numerical code to be sent to the radio receiver.
Subsequently, it is necessary to memorize this numerical code in the radio
receiver, following the indications in the specific instructions.
We recommend that you personalize the device password, write down the
password and KEEP IT IN A SAFE PLACE for future maintenance.
The device is compatible with the different types of the Benincà receivers;
the type of encoding used by the numerical code is established in point
5 of the insertion procedure. Different codes may use different types of
encoding.
QUICK GUIDE
EN
3