Beninca IRI.KPAD Guía Rápida página 27

IMPORTANT: Never use too simple or easily traceable numbers in the encoding.
IRI.KPAD can store a total of 254 codes, which can be either "Administrator PIN"
or "User PIN".
MENU 3 (USER PIN INSERTION)
After typing key 3, the customization of the User PIN is entered, indicated by 2 beeps
followed by an interval.
The User PIN can be composed of 1 to 9 digits.
- Digit the Administrator PIN (followed by #) to which the User PIN code should be
matched (it will be typed in after). If the typed in Administrator PIN is not valid, an
error is shown. If the PIN is valid, three beeps are heard and the device awaits
that the User PIN be typed in.
- Type the User PIN and then press #. The code will be matched to the Administrator
PIN typed in before. The User PIN will take the coding type and the transmitted
radio code from the Administrator PIN.
MENU 5 (SPECIFICATION OF SCALAR COUNTER)
This function can only be used with User PIN and allows to assign a defined number
of transmissions of the code, after which the code is deactivated automatically.
- Type in the User PIN code to which a scalar counter should be matched. Then press #.
If the User PIN is actually present, three beeps, followed by an interval are heard.
The following phase is entered in which the counter value is specified.
- Digit a number between 1 and 999 and press #. Device confirm with 2 beeps
and exit from menu.
When new codes are typed in, the matched counter is then decreased. When the
counter reaches zero, the matched code is removed from memory.
5) DISPOSAL
When the product is out of order, it must be disposed according to
regulations in force on waste disposal and recycling of the various
components (metal, plastics, electrical wires, etc.). For this purpose,
it is advisable to contact your installer or a specialised company.
The most recent and complete certificate of conformity is available consulting the site:
www.beninca.com or can be requested from:
Automatismi Benincà S.p.A - Sandrigo VI - Italy.
27