Working Techniques; General Working Instructions - RedMax CHT220 Manual De Instrucciones

CHT220/CHT220L
7. Starting and stopping
Warm engine
Hold the body of the machine on the ground using your left
hand (CAUTION! Not with your foot!). Grip the starter
handle, slowly pull out the cord with your right hand until
you feel some resistance (the starter pawls grip), now
quickly and powerfully pull the cord. Never wrap the
starter cord around your hand.
Stopping
The engine is switched off by moving the stop switch to the
stop position.
CAUTION!
The stop switch automatically returns to the start position.In
order to prevent unintentional starting, the spark plug cap
must be removed from the spark plug when assembling,
checking and/or performing maintenance.
US-12

8. Working techniques

■ GENERAL WORKING INSTRUCTIONS

IMPORTANT!
This section takes up the basic safety precautions for
working with a hedge trimmer.
If you encounter a situation where you are uncertain how
to proceed you should ask an expert. Contact your
dealer or your service workshop.
Avoid all usage which you consider to be beyond your
capability.
WARNING! The machine can cause serious
personal injury. Read the safety instructions
carefully. Learn how to use the machine.
WARNING! Cutting tool. Do not touch the
tool without first switching off the engine.
Safety instructions regarding the surroundings
• Never allow children to use the machine.
• Observe your surroundings and make sure that there is
no risk of people or animals coming into contact with the
cutting equipment.
• Ensure that no-one comes closer than 15 m while you
are working.
• Never allow anyone else to use the machine without first
ensuring that they have understood the contents of the
operator's manual.
• Never work from a ladder, stool or any other raised
position that is not fully secured.
• Keep in mind that the operator is responsible for
accidents or hazards occuring to other people or their
property.
Safety instructions while working
• Always ensure you have a safe and stable working
position.
• Never leave the machine unsupervised with the motor
running.
• Always use both hands to hold the machine. Hold the
machine in front of your body.