JB Systems FL30-RGB-5050-5M Manual De Instrucciones página 2

ENGLISH
 Don't connect the unit to any dimmer pack.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering
from epilepsy.
INSTALLATION
SOME IMPORTANT THINGS BEFORE YOU START:
Before you start installing the strips, make a plan on how you will install the strips. Make sure you respect the
following things while making your plan:
 MAX. ALLOWABLE LENGTH OF A STRIP: Each type of LED strip has different maximum allowable
lengths to respect. Installing longer lengths that allowed will result in over current of the conductors in the
LED strips and thus destroy the LED strip...
 MIN. POWER OF THE CONTROLLER: Each type of LED strip has a different power consumption
(watts/meter). You have to make sure that the total power consumption of the strips connected to your
power supply or LED controller does not exceed its max. output power.
Calculation:
Calculation example for a FL30-RGB-5050 strip, length 8m: 6watt/meter x 8m = 48 watt total power.
LED STRIP MODEL
FL30-RGB-5050-5M
FL60-RGB-5050-5M
A. Check how long the LED-strip should be. Check the table to see max. allowable length and power
consumption per meter. If the strip is too long, you can eventually cut it on one of the cutting lines, using
scissors. Attention: only cutting on the markings is permitted!
B. Two options to put two flexible led strips together. Option (a) is the easiest, no soldering. Option (b) is
the most flexible but you need soldering:
a. You can plug strips together using MIDDLE CONNECTORS (see the connection drawing).
b. If you need a more precise cut of the led strip, you can cut the strip on the markings. Follow the
procedure marked below:
1. Use sharp scissors to cut the led strip on one of the cutting marks. Make sure to cut exactly
on the marking in-between the soldering contacts!
JB SYSTEMS
®
power consumption strip (watt/m) x total length (m) = total power (watt)
LEDS/m
30
60
POWER (Watt/m)
6 W/m
12 W/m
2/22
USER MANUAL
Max. Length (m)
15 m
7,5 m
FL30/FL60-RGB-5050-5M