Moving The Scale - Health O Meter 2210KL Manual Del Usuario

OPERATING INSTRUCTIONS (CONT)
User Setting Options
Your scale has three additional settings that you may customize for your specific needs.
Tone on/off: A tone sounds whenever a weight is locked in or a button is pressed. (Factory
setting is "on".)
LB/GM lock: The LB/GM button can be disabled so that the scale will weigh in only the
selected unit of measure. (Factory setting is "unlocked".)
Gram/kg display: The metric unit of measure may be displayed in grams (i.e. 2541 gram) or
kilograms (2.541 kg). (Factory setting is grams.)
To change any (or all) of these settings:
1. Press ON/ZERO button and wait for the scale to display "0.0".
2. Hold MENU button down and press RECALL button. "Set-0" will be displayed and the "0"
will be flashing.
3. Press the button repeatedly until "Set-5" appears. Press the ENTER button.
4. "11011" will display with the left most "1" flashing. This sets the Tone: "1" = on, "0" = off. Use
the and buttons to input your desired setting. Press ENTER.
5. The second position will now be flashing. This disables the LB/GM button: "1" = unlocked,
"0" = locked out.
6. The third and fourth positions are not currently used. Press ENTER twice.
7. The fifth (right most) position will now be flashing. This switches the display from gram to
kilogram: "1" = gram, "0" = kg. Use the and buttons to input your desired setting. Press
ENTER.
Example: If you desire to leave the tone on and disable the keypad so it only displays kilograms,
the user settings would be "10010".

Moving the Scale

The scale should be lifted by the two black handles only.
For your added convenience, an optional wheeled cart is available, model # 2210CART.
NOTE: The scale tray should never be used for transporting a baby or objects. The tray
surface must be clear of any objects during transport.
13