MAINTENANCE
Cleaning Procedures
Proper care and cleaning of the scale is essential to ensure a long life of accurate and effective
operation. In addition to routine cleaning, include a regular check of all structural apparatus.
All external surfaces can be wiped clean with a damp cloth or tissue. A mild soap and water
solution may be used as well. Wipe unit dry with a clean, soft towel.
• DO NOT immerse scale platform into any liquids.
• DO NOT use isopropyl alcohol, other such solutions or sanitizing wipes to clean the display
surface.
• Do not use abrasive cleaners.
• Check overall appearance of the scale for any obvious damage or wear and tear.
Battery Installation
This scale is powered by six (6) standard C-cell alkaline batteries. Use the following procedure
when installing a new set of batteries:
1. Gently remove the tray by pulling up on the tray to unlock it from the platform mounting pins.
2. Remove the scale top cover by removing the six (6) screws (Fig. 10).
3. Locate the battery tray (in the rear center of the scale platform). It has a white cover that is
held down with two screws. Remove the screws and cover.
4. Remove the batteries.
5. Insert new batteries. Note the orientation that is shown on the bottom of the battery tray.
Press ON/ZERO to make sure the display powers up properly.
6. Replace the battery tray cover and screws, scale cover and tray.
Figure 10: Removing scale cover
16